Question about a Bally Slot Machine S5500

[srmonte]

I don't know where else to go.I have a bally s5500 slot machine and
the battery died showing error code 81. I put a new battery in but
need the safe clear roms to get it back up and going. Does anyone have
these roms that they could burn me a copy and I could pay you for
them. Or anywhere I could get the files, or have them emailed to me
ect.


Thanks Shaun

[c***@provide.net]

Post by srmonte
I don't know where else to go.I have a bally s5500 slot machine and
the battery died showing error code 81. I put a new battery in but
need the safe clear roms to get it back up and going. Does anyone have
these roms that they could burn me a copy and I could pay you for
them. Or anywhere I could get the files, or have them emailed to me
ect.
Thanks Shaun

This should help:
Loading Image...
and finally
Loading Image...

[klickit]

I have a set of these Proms but as I don't have my Bally 5500 anymor
you can have them. I also have a manual in PDF format that you ca
have as well. Just give me a shipping address

--
klicki
This USENET post sent from http://rgparchive.co

[srmonte]

I have a set of these Proms but as I don't have my Bally 5500 anymore
you can have them.  I also have a manual  in PDF format that you can
have as well.  Just give me a shipping address.
--
klickit
This USENET post sent fromhttp://rgparchive.com

That would be great, I sent you an email. Thank you as well clay......
Will get reading on fixes right away.

Shaun

[srmonte]

I tried resetting with the pseudo and test buttons and it will not go
to CHC still just goes straight to error 81. The board is dated 1997.
I take it that this means I need the chips???

Thanks Shaun

[c***@provide.net]

Post by srmonte
I tried resetting with the pseudo and test buttons and it will not go
to CHC still just goes straight to error 81. The board is dated 1997.
I take it that this means I need the chips???
Thanks Shaun

Yea anything past like 1995 and you
need a clear chip on those Ballys.

[m***@gmail.com]

do you still have the manual for a bally 5500? i have a bally 5500 blazing 7

[r***@hotmail.com]

http://azslot.com/Manuals/LTS_Bally_Manual.pdf

You can get the manual here.

Rob

[Ron, (Boatcat)]

Yea anything past like 1995 and you need a
clear chip on those Ballys.

You can try connecting the battery shorting
jumper, (usually resting on one side of its
2 connections), on the MPU with the power
off, hold both buttons in while powering
the machine on and wait for a "CL C" (clear)
message to display. If the message does not
appear, then its time to use clear chips.
Ram clearing chips weren't a requirement in
NJ until '99. You may get lucky! Just
thought I'd mention.

[m***@gmail.com]

I have a blazing 7s machine. The test button does not seem to work. I have held it in like the manual says. But it never does anything different. Any help would be greatly appreciated.