Substitute Sound Board in a Pinbot

[D B]

My pinbot has the original D-11297-549 sound card in it now.
I want to try to use a D-11581-4001.
Is this possible and what do I need to change to get it to work?

Thanks,
DB

[Gott Lieb?]

Post by D B
My pinbot has the original D-11297-549 sound card in it now.
I want to try to use a D-11581-4001.
Is this possible and what do I need to change to get it to work?
Thanks,
DB
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Although I have never tried it, I really don't see why it wouldn't work. The sound boards changed during the F-14 run, and I don't believe that there are different ROM images for each board with F-14. If you already have the board, try it, and see what happens.

And, from my experience with Pinbot, you should be good with just U4 installed. I've never found what the purpose of U19 is. Most Pinbots do not have that chip installed!

Jim

[D B]

Post by Gott Lieb?

Post by D B
My pinbot has the original D-11297-549 sound card in it now.
I want to try to use a D-11581-4001.
Is this possible and what do I need to change to get it to work?
Thanks,
DB
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

Although I have never tried it, I really don't see why it wouldn't
work. The sound boards changed during the F-14 run, and I don't
believe that there are different ROM images for each board with F-14.
If you already have the board, try it, and see what happens.
And, from my experience with Pinbot, you should be good with just U4
installed. I've never found what the purpose of U19 is. Most Pinbots
do not have that chip installed!
Jim

Tested it and it worked, thanks.